Leak-Proof Transparent Sealant

🛠️ No More Leaks – Brush on, seal cracks, and stay protected for years!

A waterproof and invisible insulating sealant will solve your problem!

Suitable for tiles, bricks, concrete, wood, metal, PVC, etc. Will not damage surfaces.

Easy to apply:

Just "brush" the desired surface with the adhesive and you're done! Quickly and effectively seal pipeline leaks in walls, ceilings, roofs, window frames, etc.

Durability:

It helps you save time, money and energy because it guarantees long-term protection after use. Waterproof, guarantees best performance and accepts paint.

DIRECTIONS:

Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely.

Stir contents for 30 seconds until it is thoroughly mixed.

Apply to surface by brush, roll, trowel, dip or pour. Ensure surface is completely covered.

Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours.

NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4″. Apply between 50F and 120F.

PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting.

CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers.